Low Price Welded Gabion Basket

Low Price Welded Gabion Basket 1.material:iron wire 2.Length:1-5m,Width:0.3-1.5m 3.Mesh:3/8''-4''.. 4.MOQ:50 rolls Gabion basket  1. MaterialHigh quality galvanized iron wireOther materialStainless steel wire, galvanized low iron carbon wire.. 2.Welded Gabions are made from rigid, lightweight, galvanized steel mesh that allows for machine filling, holds the alignment of the face.

Welded gabions are faster to erect and do not need tensioning.This allows them to keep their shape, to be free from bulges and depressions and fit easily against the wall.

Gabions are used in many situations including the stabilization of earth movement and erosion,river control, reservoirs,canal refurbishment,landscaping and retaining walls.

 3. Welded Gabion AssemblyStep 1 : Flat Packed Gabion

Welded Gabions are delivered on site in folded condition (flat-packed) on a pallet. All verical joints are factory fitted

 and that will increase the quality and speed of assembly on site. Depending upon the configuratinon of the

 Welded Gabions, the base and lid panels are connected with 1 horizontal helical. The accesories

(bracing ties and joining pins) are prefabricated and adjusted to the Gabion type. To close the base and lids, a

dditional spirals are included.

Step 2 : Pull Until Full Length Reached

 

Take a Gabions from a pallet and cut off the securing brace. Lift the accesories and pull the Gabion until full length

 is reached. Close the base with the helicals and fold the ends 90 inwards. Now the spirals won't detach when

we move and turn the Gabion. This will also prevent sharp end and avoid injuries. This can be done with

standard pliers. Now turn over the Gabion.

Step 3 : Joining

For large lengths, the Gabions should be connected to form a monolithic structure. Prefabricated joining pins are

provided for each Gabion. Simply grasp the 2 spirals then push them into each other. Place the joining pin into

the section and push it downwards. Care must be taken that the head of the joining pin faces inwards. This must be

done for security and will prevent vandalism. The joining must be done at both sides.

Step 4 : Bracing Ties

As to prevent heavy deformation caused by filling the Gabions, bracing ties are included in each Gabion. Depending

upon the height of the gabion, they are placed at 1/3 + 2/3 or 1/2 of the height.Now start filling the first part of the Gabion.

Bracing ties are placed 4 meshes from the sides and around the weld position. If not, the weld will break or the bracing tie

will move. Repeat this principle until the Gabions are fully filled.

Step 5 : Closing the Lid

After filling the Gabion, the lid will be closed. Use the included spirals and attach the lid at every edge including the

diaphragm panel. Also twist the ends inwards for safety.When positioning Gabions, the horizontal connections

must be done.This is usually carried out with the help of clips or lacing wire.

RemarksJoin the empty Gabions together beforehand. Then stretch or push the gabions to reach the desired length. The play

in the spirals will allow for a perfect fit. Curves can also be made when using the play.To maximize the output assembly, joining, filling, bracing and finishing the Gabion must be considered as a production line. The standard team is 3 workers and a crane with driver.If the inclination is bigger than 10m, extra bracing must be used.If the Gabion height is bigger than 1m, an extra row of bracing ties should be used.Next to your own safety guidelines, we advise you to always carry security glasses,gloves and shoes.Output can be maximized by using gabions with long length as this will result in less conections.

Application

. Mass of gravity retaining walls. Facing units to reinforce soil walls. Landfill. Perimeter walling. Acoustic barriers. River and coastal protection

. Reed beds. Weirs. Abutments. Landscaping. Free standing walls. Temporary works